Description

Joyetech Atomizer
CUBIS Pro 4ml

Joyetech Atomizer Details :

First of all this is an atomizer from Joytech.
Because of the 4ml capacity, you do not have to worry to refill it all the time.
The atomizer, also adopts innovative and a leak resistant cup design.
Furthermore, in order to refill with e liquid or to change your coil you need to remove its top section from the cap.
Another factor of the atomizer is that the airflow controls are also contained within the removable top tank assembly.
Therefore the possibility for leakage or coil flooding is greatly reduced.
Finally with the CUBIS Pro Atomizer, you’ll enjoy a great vaping experience.

CUBIS Pro specifics:

Brand: Joyetech
Model: CUBIS Pro
Type: Atomizer
Size: 22mm x 54.5mm
Capacity: 4ml
Mouthpiece: 11.5mm x 16mm
Material: SS + Pyrex glass tube
Thread: 510 Thread

Joyetech Atomizer  Features:

• Exclusive TFTA-Tank Technology with Greater Convenience
• Detachable and Washable Structure
• NotchCoil 0.25ohm DL. Head
• Multiple Atomizer Heads Can Be Applied
• Redesigned Airflow Control System
• Support MTL and DL vaping

How to assemble:
1. Screw the top cap onto the airflow ring and put the mouthpiece onto the top.
2. Drip a few drops into the atomizer head and install it onto the vent pipe.
3. Install the above part with the atomizer tube then the whole CUBIS Pro is assembled.

How to change CUBIS Pro 4ml  atomizer head:
Unscrew the atomizer cap, the atomizer head is located on the cap. Just unscrew it and replace a new one.
Note:
1. Please don’t wash the atomizer head with water. Simply scrub it with cotton or clean dry cloth.
2. Please drip at least 5 drops of e-juice to the atomizer head and vape a few times in power-off condition (with airflow widely open) before its first use to avoid dry burn.

How to re-filling: 
Separate the atomizer from the battery, and unscrew the mouthpiece base from the atomizer cap. Inject the liquid into the e-juice hole.

CUBIS Pro 4ml Note:
1. Please don’t fill in through the middle hole of the atomizer cap.
2. Please don’t overfill to avoid overflown.

Compatible with BF Replacement Coil,

CUBIS Pro Packing Items:

• Joyetech CUBIS Pro Atomizer
• Notchcoil 0.25ohm DL (30 – 70W)
• BF SS316 0.5ohm DL (15 – 30W)
• LVC Clapton 1.5ohm MTL
• Extra Derlin Spiral Mouthpiece
• Manual and Warranty card